This chapter is from the book
This chapter is from the book
This chapter is from the book
Flagging Photos
Flagging your photos as soon as you import them lets you quickly mark poor-quality photos as rejects (a black flag) and nicer ones as picks (a white flag). Whether you start by marking your rejects or your picks is up to you. I find the process goes faster marking the rejects first. I hold off deleting photos until after a complete review.
To mark rejects:
- In the Filmstrip or any of the four view modes (Grid, Loupe, Survey, or Compare), select one or more photos you want to mark as rejected. Then, depending on your view and toolbar settings, do one of the following:
- Right-click (Control-click on single-button Macs) a photo and in the pop-up menu, choose Set Flag > Rejected A.
- Press the X on your keyboard.
- If you’re in the Grid view, click the upper-left corner of one of the selected images and choose Rejected in the pop-up menu B.
- If you’re in the Compare view, click the black flag at the bottom left of the photo you want to mark as rejected C.
- In the Grid view, if the flagging option is active, click the black flag in the toolbar D.
- The rejected photo(s) are marked with a black flag and, in the Filmstrip and Grid view, dimmed compared to unrejected photos.
)
A To mark rejects, right-click (Control-click on single-button Macs) a photo and choose Set Flag > Rejected.
)
B In the Grid view, you can click the upper-left corner of a selected image and choose Rejected.
)
C In the Compare view, click the black flag at the bottom left of the photo you want to mark as rejected.
)
D In the Grid view, if the flagging option is active, you can click the black flag in the toolbar.
To mark picks:
- In the Filmstrip or any of the four view modes (Grid, Loupe, Survey, or Compare), select one or more photos you want to mark as flagged. Then, depending on your view and toolbar settings, do one of the following:
- Right-click (Control-click on single-button Macs) and in the pop-up menu, choose Set Flag > Flagged.
- Press the P on your keyboard.
- If you’re in the Grid view, click the upper-left corner of one of the selected images and select Flagged in the pop-up menu.
- If you’re in the Compare view, click the white flag at the bottom left of the photo F.
- In the Grid view, if the flagging option is active, you can click the white flag in the toolbar.
- The white flag appears by the picked photo(s) G.
)
F In the Compare view, click the white flag at the bottom left of the photo you want to mark as picked.
)
G White flags mark your picks; black flags mark your rejects, which also are dimmed.
To mark photos using the Painter tool:
- Turn on the toolbar (View > Show Toolbar or press the T on your keyboard).
- Click the triangle at the far right of the toolbar and choose Painter in the pop-up menu H.
- Click the Painter tool (the spray can) in the toolbar I.
- Click the Paint pop-up menu that appears and choose Flag J. Click the second Paint pop-up menu that now appears and make a choice based on whether you want to mark photos as Flagged, Unflagged, or Rejected K.
- In the main window, find a photo you want to mark, position your cursor (now a little spray can) over it (left, L). Click once. The photo dims, the cursor changes from a spray can to an eraser, and a flag appears in the photo’s upper left (right, L).
- To mark another photo, repeat steps 4 and 5. Or to quickly mark multiple photos, click once and drag the cursor over those photos M.
)
H To mark photos using the Painter tool, click the triangle at the far right of the toolbar and choose Painter.
){kind=small}
I Click the spray can in the toolbar to activate the Painter tool.
){kind=small}
J Click the Paint pop-up menu that appears and choose Flag.
){kind=small}
K Use the second Paint pop-up menu to choose whether you want to mark photos as Flagged, Unflagged, or Rejected.
)
L Position the spray can over a photo and click once (left). The photo dims, the cursor changes to an eraser, and a flag appears in the photo’s upper left (right).
){kind=small}
M To mark several photos, click and drag the cursor over them.
TIP
To unmark a photo, make sure the Painter tool is selected in the toolbar. Move the cursor over the photo, press Alt/Option, and it becomes an eraser. Click once to unmark a single photo or click and hold, and then drag to unmark multiple photos. A Remove Flag note confirms your action, and the dimming effect disappears N.
)
N To unmark a photo, move the cursor over the photo, and press Alt/Option. When it becomes an eraser, click once. A note confirms your action, and the photo is no longer dimmed.