- 4-1 Introduction
- 4-2 Third- and First-Angle Projections
- 4-3 Fundamentals of Orthographic Views
- 4-4 Drawing Orthographic Views Using SolidWorks
- 4-5 Section Views
- 4-6 Drawing a Section View Using SolidWorks
- 4-7 Aligned Section Views
- 4-8 Broken Views
- 4-9 Detail Views
- 4-10 Auxiliary Views
- Chapter Projects
This chapter is from the book
This chapter is from the book
This chapter is from the book
Chapter Projects
Draw a front, top, and right-side orthographic view of each of the objects in Figures P4-1 through P4-94. Do not include dimensions.
Figure P4-01 INCHES
Figure P4-02 MILLIMETERS
Figure P4-03 MILLIMETERS
Figure P4-04 INCHES
)
Figure P4-05 MILLIMETERS
)
Figure P4-06 MILLIMETERS
)
Figure P4-07 MILLIMETERS
)
Figure P4-08 MILLIMETERS
)
Figure P4-09 INCHES
)
Figure P4-10 MILLIMETERS
)
Figure P4-11 MILLIMETERS
)
Figure P4-12 INCHES
)
Figure P4-13 MILLIMETERS
)
Figure P4-14 MILLIMETERS
)
Figure P4-15 MILLIMETERS
)
Figure P4-16 MILLIMETERS
)
Figure P4-17 MILLIMETERS
)
Figure P4-18 MILLIMETERS
)
Figure P4-19 MILLIMETERS
)
Figure P4-20 MILLIMETERS
)
Figure P4-21 INCHES
)
Figure P4-22 MILLIMETERS
)
Figure P4-23 MILLIMETERS
)
Figure P4-24 INCHES
)
Figure P4-25 MILLIMETERS
)
Figure P4-26 MILLIMETERS
)
Figure P4-27 MILLIMETERS
)
Figure P4-28 MILLIMETERS
)
Figure P4-29 MILLIMETERS
)
Figure P4-30 MILLIMETERS
)
Figure P4-31 INCHES
)
Figure P4-32 MILLIMETERS
)
Figure P4-33 INCHES
)
Figure P4-34 MILLIMETERS
)
Figure P4-35 MILLIMETERS
)
Figure P4-36 INCHES
)
Figure P4-37 MILLIMETERS
Figure P4-38 MILLIMETERS
)
Figure P4-39 MILLIMETERS
)
Figure P4-40 MILLIMETERS
Figure P4-41 INCHES
)
Figure P4-42 INCHES
Figure P4-43 MILLIMETERS
Figure P4-44 MILLIMETERS
)
Figure P4-45 MILLIMETERS
)
Figure P4-46 MILLIMETERS
)
Figure P4-47 INCHES
)
Figure P4-48 INCHES
)
Figure P4-49 MILLIMETERS
Figure P4-50 INCHES
)
Figure P4-51 INCHES
)
Figure P4-52 MILLIMETERS
)
Figure P4-53 INCHES
Figure P4-54 MILLIMETERS
)
Figure P4-55 MILLIMETERS
)
Figure P4-56 MILLIMETERS
)
Figure P4-57 MILLIMETERS
)
Figure P4-58 MILLIMETERS
)
Figure P4-59 MILLIMETERS
)
Figure P4-60 INCHES
)
Figure P4-61 MILLIMETERS
)
Figure P4-62 MILLIMETERS
)
Figure P4-63 MILLIMETERS
)
Figure P4-64 MILLIMETERS
)
Figure P4-65 MILLIMETERS
)
Figure P4-66 MILLIMETERS
)
Figure P4-67 MILLIMETERS
)
Figure P4-68 MILLIMETERS
)
Figure P4-69 MILLIMETERS
)
Figure P4-70 MILLIMETERS
)
Figure P4-71 MILLIMETERS
)
Figure P4-72 MILLIMETERS
)
Figure P4-73 MILLIMETERS
)
Figure P4-74 MILLIMETERS
)
Figure P4-75 MILLIMETERS
)
Figure P4-76 MILLIMETERS
)
Figure P4-77 MILLIMETERS
)
Figure P4-78 MILLIMETERS
)
Figure P4-79 MILLIMETERS
)
Figure P4-80 MILLIMETERS
)
Figure P4-81 MILLIMETERS
)
Figure P4-82 MILLIMETERS
)
Figure P4-83 MILLIMETERS
)
Figure P4-84 INCHES
)
Figure P4-85 MILLIMETERS
)
Figure P4-86 MILLIMETERS
)
Figure P4-87 INCHES
)
Figure P4-88 MILLIMETERS
)
Figure P4-89 MILLIMETERS
)
Figure P4-90 MILLIMETERS
)
Figure P4-91 MILLIMETERS
)
Figure P4-92 MILLIMETERS
)
Figure P4-93 MILLIMETERS
)
Figure P4-94 MILLIMETERS
For Figures P4-95 through P4-100:
Sketch the given orthographic views, and add the top view so that the final sketch includes a front, top, and right-side view.
Prepare a three-dimensional sketch of the object.
)
)
)
)
)
)
For Figures P4-101 through P4-128:
Redraw the given views, and draw the third view.
Prepare a three-dimensional sketch of the object.
)
Figure P4-101 INCHES
)
Figure P4-102 INCHES
)
Figure P4-103 INCHES
)
Figure P4-104 INCHES
)
Figure P4-105 INCHES
Figure P4-106 INCHES
)
Figure P4-107 INCHES
)
Figure P4-108 INCHES
)
Figure P4-109 INCHES
Figure P4-110 INCHES
Figure P4-111 INCHES
)
Figure P4-112 INCHES
Figure P4-113
)
Figures P4-113 through P4-128 are drawn with grid backgrounds. The grid may be either 0.50 × 0.50 inches or 10 × 10 millimeters.
)
)
)
)
)
)
)
)
)
)
)
)
)
)
Draw the complete front, top, and side views of the two intersecting objects given in Figures P4-129 through P4-134 on the basis of the given complete and partially complete orthographic views.
)
Figure P4-129 MILLIMETERS
)
Figure P4-130 MILLIMETERS
)
Figure P4-131 INCHES
)
Figure P4-132 INCHES
)
Figure P4-133 INCHES
)
Figure P4-134 MILLIMETERS
Draw the front, top, and side orthographic views of the objects given in Figures P4-135 through P4-138 on the basis of the partially complete isometric drawings.
)
Figure P4-135 MILLIMETERS
)
Figure P4-136 MILLIMETERS
)
Figure P4-137 INCHES
)
Figure P4-138 INCHES (SCALE: 5=1)
Draw the following as 3D models using the given dimensions.
)
)
)
Figures P4-142 through P4-149 are presented using first-angle projection per ISO standards.
Draw the objects as
3D models
Orthographic views using third-angle projections per ANSI standards.
)
)
)
)
)
)
)
)
)
)
)
)
)
){kind=link}
){kind=link}