This chapter is from the book
This chapter is from the book
This chapter is from the book
Chapter Test Questions
Multiple Choice
Circle the correct answer.
1. Which of the following is not one of the three views generally taken of an object?
a. Front
b. Top
c. Left
d. Right
2. In the precedence of lines, a hidden line covers a(n) _____ line.
a. continuous
b. center
c. compound
d. oblique
3. Which of the following is used to define a section view?
a. A cutting plane
b. A section line
c. A centerline
4. Section lines are used to define which of the following on a section view?
a. The outside edges of the section cut
b. The location of the section view
c. The areas where the section view passes through solid material
5. Given the model shown in Figure MC4-1, which is the correct top view?
)
a. b. c.
6. Given the model shown in Figure MC4-1, which is the correct front view?
a. b. c.
7. Given the model shown in Figure MC4-2, which is the correct top view?
)
a. b. c.
8. Given the model shown in Figure MC4-2, which is the correct right-side view?
a. b. c.
9. Given the model shown in Figure MC4-2, which is the correct top view?
a. b. c.
10. Given the model shown in Figure MC4-2, which is the correct front view?
a. b. c.
Matching
Given the drawing shown in Figure MC4-3, identify the types of lines used to create the drawing.
)
|
Column A |
Column B |
|---|---|
|
a. _____________ |
1. Centerlines |
|
b. _____________ |
2. Cutting plane line |
|
c. _____________ |
3. Continuous line |
|
d. _____________ |
4. Section line |
|
e. _____________ |
5. Hidden line |
True or False
Circle the correct answer.
1. True or False: Orthographic views are two-dimensional views used to define three-dimensional models.
2. True or False: Normal surfaces are surfaces located 90° to each other.
3. True or False: Hidden lines are not used in orthographic views.
4. True or False: A compound line is formed when two slanted surfaces intersect.
5. True or False: An oblique surface is a surface that is slanted in two different directions.
6. True or False: Center points cannot be edited; they can be used only as they appear on the drawing screen.
7. True or False: A section view can be taken only across an object’s centerline.
8. True or False: Aligned section views are most often used on circular objects.
9. True or False: A detail view is used to enlarge portions of an existing drawing.
10. True or False: Break views are used to shorten long continuous shapes so they can fit within the drawing screen.